
TYCO, SIMPLEX, and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited. Microsoft and Windows are trademarks
of Microsoft Corporation. VESDA is a trademark of Vision Products Pty Ltd.
Door thickness
4-3/4" (121 mm)
Exposed cabinet for
semi-flush mounting
1/2" (12.7 mm) minimum
24" (610 mm)
11-11/16"
(296 mm)
6-29/32"
(175 mm)
4" stud
6" stud
Knockout screw/nail holes
(for semi-flush mounting)
Stud alignment
markers, each side
Wall board reference
for semi-flush
mounting, 6" stud
Optional semi-flush
trim kit reference
Front view, box outline without door Side view with door attached
2 Bay height =
40" (1016 mm)
3 Bay height =
56" (1422 mm)
1 Bay height =
22" (559 mm)
Doors can be hinged left or right
Subject Data Sheet Subject Data Sheet
NDU with EPS Power Supplies S4100-0102 MINIPLEX Transponders S4100-0035
4100ES Basic Panels with EPS Power Supplies S4100-0100 4100ES Enclosures S4100-0037
4100ES Basic Panels S4100-0031 Remote Annunciators S4100-0038
LED/Switch Modules S4100-0032 Remote Battery Charger S4081-0002
4100ES Audio/Phone Modules S4100-0034 Fiber Optic Modems S4100-0043
SafeLINC Fire Panel Internet Interface S4100-0062 TrueSite Workstation S4190-0016
InfoAlarm Command Center S4100-0045 Master Clock Interface Module S4100-0033
Installation Instructions 574-848
Operating Instructions 579-197
Tyco Fire Protection Products • Westminster, MA • 01441-0001 • USA S4100-0036-15 10/2014
www.simplex-fire.com
© 2014 Tyco Fire Protection Products. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice.
Wall Mounted Enclosure Installation Reference
NOTE: A system ground must be provided for Earth Detection and transient protection devices. This connection shall
be made to an approved, dedicated Earth connection per NFPA 70, Article 250, and NFPA 780.
Additional 4100ES Data Sheet Reference
Additional 4100ES Technical Reference
Comentários a estes Manuais