BC Time Recorder Simplex 100 Manual do Utilizador descarregar pdf (Página 7)

Input Power [System (SPS); Expansion (XPS);

Remote (RPS); and 100 W amplifiers]

120 VAC Models 4 A maximum @ 102 to 132 VAC, 60 Hz

220-240 VAC Models

2 A maximum @ 204 to 264 VAC, 50/60 Hz;

separate taps for 220/230/240 VAC

Power Supply Output

Ratings for SPS, XPS,

and RPS (see data

sheet S4100-0031 for

more detail)

Total Power Supply

Output Rating

Including module currents and auxiliary power outputs; 9 A total for

“Special Application” appliances; 4 A total for “Regulated 24 DC” power

Output

switches to

battery

during AC

failure or

brownout

Auxiliary Power Tap 2 A maximum @ nominal 28 VDC

NACs Programmed for

Auxiliary Power

2 A maximum per NAC;

5 A maximum total

Rated 19.1 to 31.1 VDC

Battery Charger

Ratings for SPS and

RPS (sealed lead-acid

batteries)

Battery capacity range

UL listed for battery charging of 6.2 Ah up to 110 Ah (batteries larger than 50 Ah require

a remote battery cabinet); ULC listed for charging up to 50 Ah batteries

Charger characteristics

and performance

Temperature compensated, dual rate, recharges depleted batteries within 48 hours per

UL Standard 864, to 70% capacity in 12 hours per ULC Standard S527

Environmental

Operating Temperature Range 32° to 120°F (0° to 49° C)

Operating Humidity Range Up to 93% RH, non-condensing @ 90° F (32° C) maximum

Model Description

4100-6034 Door Tamper Switch with built-in addressable IDNet IAM, one per cabinet assembly if required

4100-2320 Audio Bay-to-Bay Interconnection Harness Kit; order one for each audio bay addition

4100-0637 Audio Box Interconnection Harness Kit; order one for each close-nippled audio cabinet

4100-9835 Termination and Address Label Kit (for module marking); provides additional labels for field installed modules

4100-1290 24 Point I/O Module; I Slot (see data sheet S4100-0032 for details)

4100-1293 Panel Mount Thermal Printhead Printer, supplied with one roll of paper; requires 3 Slots; see S4100-0032 for details

4190-9803 Replacement Paper for 4100-1293 Printer, one roll

4100-6045 Coded Manual Station Decoder Module; 3 Slot module; 85 mA supervisory, 163 mA alarm; see S4100-0018 for details

4100-6048 VESDA Air Aspiration Interface; 1 Slot module; 132 mA supervisory or alarm, see S4100-0026 for details

Model* Description Model* Description Model* Description

4100-5005 8 Zone IDC, Class B 4100-3110 250 Point IDNet 2+2 Module 4100-3202 4 DPDT Relays w/feedback, 10 A

4100-5015 8 Zone IDC, Class A 4100-3102 127 Point MAPNET II Module 4100-3204 4 DPDT Relays w/feedback, 2 A

4100-3109 250 Point IDNet 2 Module 4100-3103 MAPNET II Quad Isolator 4100-3206 8 SPDT Relays, 3 A

* See data sheet S4100-0031 for details

Model Description

4100-1279 Single blank 2” display cover; order as required (8 fill a bay front); two max. in a row between LED/switch modules

4100-2210 Appliqué, Canadian French, 4100ES Fire Control

4100-2300 Expansion Bay Hardware, order for each expansion bay (unless included with selected option)

4100-0636 Box Interconnection Harness Kit; order one for each close-nippled cabinet

4100-0632 Terminal Block Module; 2, 16 position terminal blocks mounted on 4” x 5” single block size, for up to 12 AWG wire (3.31 mm

)

4100-5128 Battery Distribution Terminal Block; mounts to side of box; required for close-nippled cabinets that interconnect battery wiring

7 S4100-0036-15 10/2014

Slot 1 Slot 8Slot 7Slot 6Slot 5Slot 4Slot 3Slot 2

Expansion Bay Chassis

Block A

Block B

Block C

Block D

Block E

Block F

Block G

Block H

Size Definitions: Block = 4” W x 5” H (102 mm x 127 mm) card area

Slot = 2” W x 8” H (51 mm x 203 mm) motherboard with daughter card

General Specifications

Expansion Bay Module Loading Reference (exact locations are provided with shipped product)

Description Mounting

Terminal Block Module 4” x 5”, 1 block

Class B Physical Bridge 2”, 1 slot

Class X Physical Bridge 4”, 2 slots

System or Remote Power Supply

Blocks E, F, G & H

ONLY

Expansion Power Supply Blocks G & H ONLY

Audio Controller Modules Blocks A & B

Flex-35 Amplifiers, 2 max/bay*

Blocks E & F; C & D; or

A & B

Flex-50 Amplifiers, 2 max/bay* Blocks E & F or C & D

100 W Amplifiers, 1 max/bay Blocks E, F, G & H

100 W Backup Amplifiers, 1 max.

per bay with primary amplifier

Blocks A, B, C & D

Master Telephone Module Blocks A & B

Master Microphone Module (do

not mount next to telephone)

Two vertical Blocks,

any location

Telephone Module 1 Block

Operator LED/Switch Modules 1 Slot

* NOTE: When mounting dual Flex amplifiers on an

expansion bay, special mounting rules apply.

NDU with VCC – Additional Options

NDU or NDU with VCC Additional Options

1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários

BC Time Recorder Simplex 100 Manual do Utilizador Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Proteção contra incêndios BC Time Recorder Simplex 100